- This drawer kit features a 348mm (13.7") wide drawer on the left and a 448mm (17.6") wide drawer on the right, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions
- 113kg / 250 lb per drawer load carrying capacity.
- High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
- Provide peace of mind and security by locking away important travel items such as computers, tablets, navigation units, smart phones and camera gear.
- The Deck Completion Set incorporates 1 left hand side deck, 1 right hand side deck, wing set brackets and front covers.
- The side decks are fitted using the supplied custom wing sets.
- The decks provide a clean, finished look, while providing a level packing or mounting surface.
- These custom side decks are easily removed and installed using the C clip system.
- The decks above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
- Removing the side decks creates storage spaces between the drawer kit and vehicle for a variety of items, including tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbecue skewers and a host of related adventure equipment.
- Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack, aluminum boxes and other storage containers to the top decks using Stratchits.
- To create a removable box option, just insert 2 Cub Pack. Designed to fit inside Front Runner drawers, the Cub Pack can be used to further organize and easily move gear in and out of a vehicle.
- To create compartments within the drawers, add the optional steel Drawer Dividers. These helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 3 dividers per drawer.
- The deck is covered with a durable, UV resistant nylon pile black carpet to complement the vehicle’s interior.
- The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
- Finished with the same durable black powder coating as Front Runner racks
- This drawer kit is installed by bolting it through the wheel arches, and can be fitted with the factory wooden floor boards in place by adjusting the mounting bracket position
- Rear seats fully functional with the Drawer Kit installed.
- Drilling is required.
- All Front Runner Storage Systems are backed by a 2-year warranty.
*Please Note: Cub Packs and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.
1 x Base Drawer unit with 2 drawers (SSDR003)
1 x Deck Completion Set (SSDS803)
2 x Front Face Plates
1 x Wing set
2 x Keys per lock
3 x Accessory channels
6 x Eye Nuts for accessory channels
Aluminum - Accessory Channels & Sub Frame
Black powder coated steel - Drawer Bins & Frame
Nylon Carpeted Laminated plywood - Top Deck
782mm (30.8") L x 990mm (39") W x 300mm (11.8") H
1480mm (58.3") W (with Side Decks)
Interior Drawer Dimensions:
Left Hand Drawer:
717mm (28.2") L x 348mm (13.7") W x 210mm (8.3") H
Right Hand Drawer:
717mm (28.2") L x 448mm (17.6") W x 210mm (8.3") H
113Kg (250lbs) per Drawer
3 Drawer Dividers (SSCA048) can fit each Drawer